Other suggestions on how to deal with the battery are also welcome since it is completely unused. Thank you!

⟐ Answered January 19, 2026 at 11:15 MST

The battery and hex tool were received, thank you.  Unfortunately, the battery is for a newer model of the Bose Mini Soundbar and will not work in my unit.

May I please return the battery ?   I would like to keep the hex tool please

Please let me know your process for returns.

Many thanks from West London for your efficient and professional service.

Sincerely yours

Stephan C Reinke RIBA FAIA

⟐ Answer edited January 17, 2026 at 13:46 MST

How to upload a programming video of a temperature control?

Temperature control and PID control

⟐ Edited January 17, 2026 at 13:48 MST

It stops before the Step with a Video and will not continue.

Here an example:

• https://ifixit.com/Anleitung/embed/18175...

This should have:

• a Video (pre last step)
• a Text: "The End" (last step).

Both you can't not see in the embed / full-screen variant.

My Browser (Firefox) say: JavaScript Console says: Uncaught ReferenceError: doesLoop is not defined

Thanks for your work.

⟐ Edited by author January 17, 2026 at 2:34 MST

⟐ Commented January 15, 2026 at 20:46 MST

⟐ Answered January 15, 2026 at 16:58 MST

U.S.A.? Taiwan? China (PRC)? Vietnam?

The "support" hyperlink on your pages doesn't work.

⟐ Answered January 15, 2026 at 11:27 MST

⟐ Answered January 13, 2026 at 9:50 MST

⟐ Answered January 13, 2026 at 9:42 MST

⟐ Answer edited January 16, 2026 at 20:25 MST

But my expensive straight, 12-lamp C9 LEDs are especially frustrating, due to their complex of changing patterns that variably go awry. I end up replacing entire strings to just quickly keep the show impact on the house consistent and pleasing. Now I’ve accumulated 12 or 15 faulty strings. The manufacturer once sent 24 new sets as their answer to our complaints, which was great and appreciated, but I’m now running low on even those.

I think they work by the control module cyclically changing the patterns via current modulation. The lamp color changes by how much current passes through it. Plugged in end to end, each 12 lamp set follows the same cycling from its module, so all 24-25 sets on the house, ridgeline and fascias, work exactly together, in both pattern and color. At least until one doesn’t, either staying partially or completely white or flickering, or rarely entirely dead.

One year the company sent a pack of LEDs, as they are peculiar to their products, and can’t be replaced by any other version. Once or twice in the past I managed to switch lamps around in a set, and luckily get a useable combination that worked, but only after hours of effort, mostly hit and miss.

I believe the more common problem is in the control modules, perhaps rain water intrusion, or just worn out circuit board components. Before I crack modules open for inspection, it sure would be great to have a guidance video for repairing the boards. Please consider such an endeavor as I can’t be alone with this very consterning situation. And at 77, with my own physical mobility issues, I can’t risk, anymore, constantly mounting and climbing around the roof trying to correct/replace faulty sets. My grandson puts them up and takes them down annually, but living 800 miles away, he isn't available for the interim weeks.

My particular “light show” sets are by Toyo Electric, I believe distributed by Roundtripping, Ltd, and “TY-16F” is on the control modules.

⟐ Commented January 11, 2026 at 1:29 MST

⟐ Commented January 07, 2026 at 10:31 MST

⟐ Commented January 07, 2026 at 10:23 MST

Please tell me if you do you have on stock a rear camera glass?

Thanks!

⟐ Commented January 06, 2026 at 23:32 MST

I would like to have the following guides flagged as prerequisite only:

• https://www.ifixit.com/Guide/Avid+Fast+T...
• https://www.ifixit.com/Guide/Avid+Fast+T...
• https://www.ifixit.com/Guide/Avid+Fast+T...

Just double checking, this is the correct procedure to ask to flag guides as 'prerequisite only' in this forum, right?

Thanks in advance <3

Cheers

⟐ Commented January 06, 2026 at 23:24 MST

There was already an existing guide that consisted of nothing more than a link to a YouTube video, so I started with that. I'm about 95% done with it, when I noticed something curious. The guide I'm working on no longer appears on the device page for the iPhone 11 Pro Max.

I can still access it by going to my activity page, but I have no idea how to get it to show back up on the device page. Everything I do with regard to editing it works fine, though, and the title at the top shows the proper link to the device page, so it thinks it's in the right place.

But even going to the device page directly from the guide page, that guide is just not there. @krisrodriguez, can you get someone to look at this?

Here's the device page where the MIA guide should be.

iPhone 11 Pro Max Repair Help: Learn How to Fix It Yourself.

And here's the link to the guide I'm working on.

iPhone 11 Pro Max Lightning Connector Assembly Replacement - iFixit Repair Guide

Thanks,
Jerry

⟐ Commented January 06, 2026 at 19:56 MST

⟐ Answered January 06, 2026 at 17:30 MST

Is there any info on if this will be ever available or any way to receive one without spending 329.95€ on tools I already have?

Best,

-Alex

⟐ Commented January 06, 2026 at 17:29 MST

iPad Pro 11" and 12.9" (2018/2020) USB-C Port

I only found this one, it seems not compatible with the iPad Pro 11" 3rd generation.

⟐ Answered January 06, 2026 at 17:24 MST

Is there a way I can buy the old screwdriver?

Thank you!

⟐ Answered January 06, 2026 at 17:22 MST