Hi Andrew,
thanks for your answer.
I have used the guides quite often and they where always very precise, as for the iPod and iPhone guides i have used before.
Heat gun:
I own a heat gun where you can set the temperature, in steps of five degrees and there is no setting for "low". So i was confused by "low", because what temperature is "low"? Is "low" always the same temperature on all heat guns out there? If the guide would say "set to low or (lets say) 120°C" thats something to deal with, because 120°C is always and everywhere 120°C. The ones without a thermometer set to low, the ones with a thermometer could check and the ones with a heat gun like me set to 120°C.
iPad glass removal:
As i had to wait for the spare parts to be delivered, i was loocking for some repair videos on youtube and they all talk about areas to be carefull with during repair. As the WiFi-Antenna, home button, digitizer cable, cellular and gps antenna and front facing camera.
If you have guides for the iPad3 with and extra section for the 4G versions. why do you use the picture of a WiFi iPad in the 4G section and dont even mention that there are the gps and cellular antenna?
Tools
The sticky pad was really helpfull. I put the iPad onto the sticky pad. Then I warmed up the area to pry open with the flat iron and inserted the pry tool. I warmed up the adhesive and followed with the pry tool, working along the outlines. This way only the part to be released is heated up and you can work constantly all the way around.
Greets,
Chrisb
