Skip to main content

Site Navigation

Your Account

Choose Language

Help

Current version by: Nick ,

Text:

Is there any improvement with the new driver from the 64-bit kit compared to the 54-bit driver kit's stock handle? I'm not exactly fond of the one in the 54-bit driver kit. It's too thin, slippery and quite frankly, has too little torque. If you have a tight screw, you might as well bring a drill because odds are it's as good as stripped.
Is there any improvement with the new driver from the 64-bit kit compared to the 54-bit driver kit's stock handle? I'm not exactly fond of the one in the 54-bit driver kit. It's too thin, slippery and quite frankly, has too little torque. If you have a tight screw, you might as well bring a drill because odds are it's as good as stripped.

Status:

open

Edit by: Nick ,

Text:

Is there any improvement with the new driver from the 64-bit kit compared to the 54-bit driver kit's stock handle? I'm not exactly fond of the one in the 54-bit driver kit. It's too thin, slippery and torque limitedquite frankly, too little torque. If you have a tight screw, you might as well bring a drill because odds are it's as good as stripped.
Is there any improvement with the new driver from the 64-bit kit compared to the 54-bit driver kit's stock handle? I'm not exactly fond of the one in the 54-bit driver kit. It's too thin, slippery and torque limitedquite frankly, too little torque. If you have a tight screw, you might as well bring a drill because odds are it's as good as stripped.

Status:

open

Original post by: Nick ,

Text:

Is there any improvement with the new driver from the 64-bit kit compared to the 54-bit driver kit's stock handle? I'm not exactly fond of the one in the 54-bit driver kit. It's too thin, slippery and torque limited.

Status:

open