HP Pavilion 15 guide feedback request
Since I had some time to open this machine up, I figured I'd make a few guides to show how to replace some of the major parts. Part of this is because of the design being so bad for service, since you practically have to do a full teardown to replace a lot of the components. I haven't gotten to the RAM yet, since that's a motherboard removal job and I don't want to go that far yet. However, access to the components I did guides for were easily accessed when I went to clean the fan. I have a feeling HP hired the engineer behind the Dell N5010/N5110 with that hard drive layout, since that system is just as bad with the majority of the parts you will have to replace.
Right now, I have the following guides done:
Update
I have made the following changes:
- Some minor rewording of text
- Step 9 and 10 are combined
- I have since discovered the repair problems are a P series problem. A new Device page has been issued reflecting this.
- Added a note reflecting the daughterboard can be removed if it gets annoying
- Added additional markers in the palmrest guide to reflect the missing screws in this machine.
Is this a worthwhile discussion?