Size Marking on the Pro Tech and Mahi Drivers kit
I noticed that the markings on the foam where the bits are stored are black, hard to read, may improve by making the marking white or yellow. Black on black label is just a bad idea.
Is this a good question?
This question was migrated from https://www.ifixit.com/Answers.
by iRobot
The same thing happens in the basic kit. It would really be a good improvement. Black text on black background does not usually work well.
by Oscar
Thank you for the feedback. I'll pass this along to our tool development team.
by Kristen Gismondi
I noticed this when I got the kit too. It's a little annoying. the best way to manage it I've found is to only have 1 bit out at a time so they all stay in the right place.
by Ian
What I personally do is I eyeball it and see if I got the right bit. If I missed it goes back in.
I also take out the bits I need and do not take any more out.
by Nick