1. Are there any DIY methods to reinstall or recover watchOS on a Series 8 without an Apple developer dock or sending it in?

2. Could this still be a hardware fault (e.g., failing S8 SiP or NAND) despite the repair shop’s opinion?

3. Any experiences with third-party services that can re-flash or re-pair watchOS safely in Australia?

Hey all,

I saw some of these "admin-approved" labels on some people's activity, and was wondering what they meant. After looking at it, it just appears to be a blank admin edit to a guide or device. Could someone clarify what they mean and do? I'm a bit new to this and am looking to learn more about the different editing labels and patrolling process.

Thanks,

tqd

Hey all,

I saw some of these "admin-approved" labels on some people's activity, and was wondering what they meant. After looking at it, it just appears to be a blank admin edit to a guide or device. Could someone clarify what they mean and do? I'm a bit new to this and am looking to learn more about the different editing labels and patrolling process.

Thanks,

tqd

Where can I order a new screen replacement kit for my 2024 Motorola G stylus

Hi, I have a Hoover PowerVac Pet 20-Volt Lithium-Ion Handvac and cant find a charger for it anywhere. Tried customer support and this particular model is discontinued. Machine works fine by no means to charge. Could someone help me with identifying a replacement charger or specification of the charger so I can source one? MODEL No. BH10140CAI can get a universal charger but I dont know what is the specification or rating of the original charger. Also, I dont know the charging port pin size.I also have the Hoover charger part no. ZD5F230030US

Hey all,

I saw some of these "admin-approved" labels on some people's activity, and was wondering what they meant. After looking at it, it just appears to be a blank admin edit to a guide or device. Could someone clarify what they mean and do? I'm a bit new to this and am looking to learn more about the different editing labels and patrolling process.

Thanks,

tqd

I’m trying to resolve an intermittent misfire in cylinder 2.

I first changed the spark plugs and found oil around the plug. I changed the valve cover gasket. No success.

Next, I checked the coil. It was OK. No success.

Next, I cleaned the mass air flow sensor and changed the air filter. I also cleaned the throttle body and put a bottle of Red Line engine cleaner on the tank. No success.

Next, I did a compression check. 3 cylinders were the range of 150 the number 2 came up around 120.

Next, I cleaned the fuel injector. No success.

Any suggestions? ThanksHow do I submit a question?

Kia sedona won start what could the problem be?